The numbers tell the story. In a survey by NTT-Advanced Technology, 98% of cable installers and 80% of network owners cited contamination as a major cause of network failure. Rather than networking inefficiency, they are referring to a total network failure. Clearly, these failures can cause a lot of money to be wasted. If this issue is resolved, a huge source of network failure can be prevented, as well as the associated costs. It is therefore very important to clean fiber optic end faces and components.
Regular cleaning is essential to ensure that the fiber optic system is running efficiently. Cleaning fiber optic end faces should be done with a lint-free cloth and a non-abrasive cleaner. If needed, use a fiber optic cleaning stick to clean the fiber end face properly. It is essential to follow the manufacturer's instructions for cleaning fiber optics. This will help prevent dust and other debris from accumulating on the fiber optic end faces and ensure that signals are transmitted with minimal loss. Additionally, proper cleaning can help extend the life of the fiber optic system. It is important to use the correct type of cleaner to avoid damaging the fiber. Cleaners that contain alcohol or other solvents should be avoided. Furthermore, it is important to inspect the fiber optic end faces regularly to ensure they are clean and free of debris. Cleaning should be done gently and with a lint-free cloth. It is also important to use the correct cleaning tools, such as fiber optic swabs, one-click pen cleaner,reel type fiber connector cleaner and clean wipesthat are specifically designed for fiber optics. Finally, it is important to avoid excessive cleaning, which can lead to scratches and other damage. It is also important to use the correct cleaning solution, such as isopropyl alcohol, or a manufacturer-recommended solution.
Here are some useful tools used in the fiber optic cleaning process. These tools include specific fiber optic microscope, which is used to inspect fiber optic end face by enlarging the picture through a video signal on display. The fiber optic microscope helps to detect any defects in the fiber connectors. Furthermore, it can also help in verifying the fiber alignment.
The one-click pen fiber optic cleaner is designed for quick and easy cleaning without the need for additional tools. It can be used on both single-mode and multi-mode fibers. The cleaner is made with a durable material and can be used multiple times. One-click pen fiber optic cleaner can clean fibers in both two ways - the male fiber optic end face and the female fiber bulkhead. 2.5mm/1.25mm pen cleaner is for cleaning FC SC ST E2000 & LC MU. MPO/MTP fiber optic cleaner is designed for cleaning MPO/MTP fiber optic end face. It is a great tool for ensuring reliable fiber optic connections and preventing network performance issues. The cleaner is also easy to use and is suitable for a wide range of fiber optic cleaning applications.
Reel type cassette connector cleaner is used to clean the male fiber end-face male type only. This ensures reliable performance and prevents signal loss. It is important to use a reel type cassette connector cleaner to properly clean the fiber end-face before connecting. Its cleaning reel can be replaceable, cleaning times up to 500+.
Fiber optic cleaning wipes/sticks/swabs are the most efficient and cost-effective way to clean fiber optic networks. They are essential for any fiber optic network installation or maintenance. They should be used regularly to ensure the system is kept in good condition.
There are still some special cleaning applications like narrow space cleaning,GPON/EPON modem cleaning and SFP transceivers cleaning. They need an appropriate fiber optic cleaners designed for special angles or working space. These special applications require a fiber optic cleaner that is specially designed to be able to access and clean difficult angles or tight spaces. These cleaners are typically smaller and more precise than the standard fiber optic cleaner. For instance, a GPON/EPON modem cleaner is designed to clean the connection port of a GPON/EPON modem at angled 90 degree.
https://www.3stelecom.com/One-click-Fiber-Optic-Cleaner-pl49346487.htmlThe numbers tell the story. In a survey by NTT-Advanced Technology, 98% of cable installers and 80% of network owners cited contamination as a major cause of network failure.
REMOVAL NOTICE To our dear partners and customers: First of all, thank you for your long-term care and support for our company. We are so grateful for the pleasure of serving you and hope we met your expectations. Due to the company's business development needs, our company has been relocated before
Why do we need FIBER OPTIC CABLE FAULT TRACKER?With the fast development of internet, the fiber optic telecommunication has been gradually popularized everywhere. Especially when Covid-19 break out, more governments realized the importance of internet. How to find fiber optic cable faults quickly is very import.
Introduction of TV Signal Level DB Meter CATV field strength meter is an instrument that measures the field strength of a TV signal. Field strength is the abbreviation of electric field strength, which is the magnitude of the electric signal induced by the antenna at a certain point in space to chara
In the Gigaband era, telecom operators engaged in Gigaband development and promotion face major challenges in terms of fast deployment and efficient management of fiber infrastructure networks. QuickConnect solution -preconnection fiber access terminal box and preconnection FTTH drop cable can achieve fast deployment, which make sure all inputs/outputs pre-terminated at factory connection quality is better and save labors'cost and time.
An Optical Time Domain Reflector Meter (OTDR) is a high precision testing instruments used to locate events or faults in a fiber link. The OTDR combines a laser source and a detector to provide an inside view of the fiber link. The laser source sends a signal into the fiber where the detector receives the light reflected from the different elements of the link. This produces a trace on a graph made in accordance with the signal received, and a post-analysis event table that contains complete information on each network component is then generated. Then How to Read and Interpret OTDR Events Test Report, it is very important for every technician. OTDR events include Non-reflective Events, Reflective Events, Fiber End, Miss-Matched Fibers or called Gainer, and Ghosts.
As the development of FTTx is very fast, especially FTTH (Fiber to the Home), that means Telecom providers/operators need serve very large quantity of subscribers. So telecom providers need build and maintain more and more fiber optic networks. Therefore, useful testing instruments for acceptance, troubleshoorting and maintaining fiber optics networks are very important and necessary. An OTDR is the right test instrument for telecom engineers in the field. Then, how can we make an OTDR perform better in the real testing tasks? Of course, the OTDR quality is very important. Besides that, some knowledge you must be known about OTDR is necessary too.
